Induction hardening machine - HardLine Hybrid

The world’s fastest and most flexible horizontal hardening machine

The HardLine Hybrid combines a pusher machine (HP) and a continuous loading machine (HC) into one single machine.
The system is modular, so the same machine can be used as HC only, HP only, or have both HC and HP assemblies installed, essentially providing you with two functionalities in the same machine. The HardLine horizontal heat treatment systems are field-proven solutions that deliver short cycle times, reproducibility and the reliability needed when mass-producing steel bars and shafts.
With the HardLine Hybrid, high scanning speed, quick loading/unloading systems and proven components work together to ensure high throughput rates. The machine, which is powered by an EFD Induction Sinac converter, can handle workpiece lengths from 50 to 600 millimetres and diameters of 5 to 50 millimetres. Automatic reject separation allows working without stops.
The HardLine Hybrid machine is very operator friendly with smart ergonomic design and easy-to-use control interfaces. It can be adapted to a new workpiece size, at the push of a button. Due to its numerous automatic systems, the set-up time is greatly reduced, taking only seconds to adjust.
 A single HardLine Hybrid machine can replace HC/HP systems and can therefore handle a wider range of workpiece dimensions and types, reducing the need for dedicated machines and requiring lower capital investment.